microcontroller

PIC18F26K22-I/SP - Microchip Technology Specification/Additional Details Model Name/Number PIC18F26K22 Brand MICROCHIP Mounting Type DIP RAM Size3896 ADC Resolution19 Part Number PIC18F26K22

NUVOTON W78E052DDG Microcontroller

PIC16F883-I/SP - Microchip Technology Specification/Additional Details Model Name/Number PIC16F883 Brand MICROCHIP Mounting Type DIP RAM Size256 ADC Resolution11 Part Number PIC16F883

PIC16F690-I/P - Microchip Technology Specification/Additional Details Model Name/Number PIC16F690 Brand MICROCHIP Mounting Type DIP RAM Size256 ADC Resolution12 Part Number PIC16F690

PIC16F628A-I/P Microchip Technology Specification/Additional Details Model Name/NumberPIC16F628 Brand MICROCHIP Mounting Type DIP RAM Size224 Part Number PIC16F628 Program Memory Size2048

DSPIC30F2010-30I/SP PIC Microcontroller

MS51FB9AE Nuvoton Microcontroller NuMicro® MS51FB9AE is embedded with based on 1T 8051-based CMOS microcontroller, runs up to 24 MHz, features 16 K bytes flash, 1 K bytes SRAM, and 4 K bytes loader ROM for the ISP, also equipped with rich peripherals: 2 sets of UART; 1 set of I²C, and 1 set of SPI, 18 GPIO, 8 channels of 12-bit ADC, Watchdog Timer, Window Watchdog Timer and 6*16-bit PWM channel, package is available in TSSOP20. Target Application: LED lighting Home appliances Industrial control Motor control Battery management system Power supplies Key Features: • Operating Characteristics - Voltage range: 2.4V to 5.5V - Temperature range: - 40 ℃ to + 105 ℃ - EFT 4 kV • Core - 1T 8051-based CMOS microcontroller running up to 24 MHz • Memories - 16 K bytes Flash - Configurable 4 K / 3 K / 2 K / 1 K Bytes of LDROM, which provides flexibility to user developed Boot Code - 1 K bytes SRAM - 256 Bytes on-chip RAM - Flash Memory accumulated with pages of 128 Bytes each - Built-in In-Application-Programmable ( IAP ) • Clocks - External clock input ( 32 K body only ) - 16 MHz high-speed internal oscillator trimmed to ± 1 % when VDD 5.0 V, ± 2 % in all conditions. - 24 MHz high-speed internal oscillator trimmed to ± 1 % when VDD 5.0 V, ± 2 % in all conditions - 10 kHz low-speed internal oscillator - On-the-fly clock source switch via software • Power management - Brown-out detection ( BOD ) with low power mode available, 4-level selection, interrupt or reset options - Power-on reset ( POR ) • Peripherals - Two 16-bit Timers / Counters 0 and 1 compatible with standard 8051 - One 16-bit Timer 2 with three-channel input capture module and 9 input pin can be selected - One 16-bit auto-reload Timer 3, which can be the baud rate clock source of UARTs - One 16-bit PWM counter interrupt for timer - 6*16-bit pulse width modulator ( PWM ) output, with different modes and Fault Brake function for motor control - One programmable Watchdog Timer ( WDT ) - One dedicated Self Wake-up Timer ( WKT ) - 2 full-duplex UART ports with frame error detection and automatic address recognition - 1 SPI port with master and slave modes, up to 12 Mbps when system clock is 24 MHz - 1 I²C bus with master and slave modes, up to 400 kbps data rate - 8 channels of 12-bit ADC, up to 500 ksps converting rate - 18 general purpose I / O pins and 1 input-only pin - Programmable pull-ups pull-lows • Development Tools - Nuvoton Nu-Link with KEILTM and IAR development environment - Nuvoton Nu-Link In-Circuit-Programmer - Nuvoton In-System-Programming ( ISP ) • 96-bit Unique ID ( UID ) • 128-bit Unique Customer ID ( UCID ) • 2-Byte ( 16-bit ) PDID

MG51XB9AE Nuvoton Microcontroller NuMicro® MG51XB9AE is embedded with based on 1T 8051-based CMOS microcontroller, It supports 16/24 MHz core speed and features up to 16K bytes flash, 0 bytes SRAM, and 1 Kbyte of auxiliary RAM (XRAM), 4 Kbytes of Flash loader memory (LDROM), 2.4V to 5.5V operating voltage, and -40°C to105°C operating temperature. MG51 series is equipped with rich features 4 sets of 16-bit Timers, 8 channels of 500k SPS 12-bit ADC, 6 channels of PWM, 2 sets of UARTs, 1 set of SPI, 1 set of I²C MG51 series is suitable for high-reliability industrial and consumer applications. package is available in QFN20. Target Application: Home appliances LED lighting controls Motor controls Industrial automation Features: • Operating Characteristics - Operating Voltage: 2.4 V to 5.5 V - Operating Speed: Up to 24 MHz - Operating Temperature: -40°C to +105°C • Core - 1T 8051-based CMOS microcontroller running up to 24 MHz - Instruction set fully compatible with MCS-51 - 4-priority-level interrupts capability • Memory - 16 Kbytes Flash - Configurable 4 Kbytes of LDROM, which provides flexibility to user developed Boot Code. - 0 Bytes SRAM - 256 Bytes on-chip RAM. - Flash Memory accumulated with pages of 128 Bytes each. - Built-in In-Application-Programmable (IAP). • Clocks - 16 MHz high-speed internal oscillator with selectable 24 MHz core speed, trimmed to ±1% when VDD 3.3V, ±3% in all condition - 10 kHz low-speed internal oscillator. calibrating to ±10% precision • Timer - Four 16-bit timers - Six channels of pulse width modulator (PWM) output, with Fault Brake function - One dedicated Self Wake-up Timer (WKT) for self-timed wake-up for low-power modes - One programmable Watchdog Timer (WDT) clocked by dedicated 10 kHz internal source • Power Management - Two low power modes: Idle and Power-down mode - Power-down current: 8 μA • Analog - One 12-bit, 500 k SPS SAR ADC (8 channels input) • Communication Interface - One SPI port with master and slave modes, up to 12 Mbps when system clock running at 24 MHz - One I²C bus with master and slave modes, up to 400 kbps data rate - Two full-duplex UART ports with frame error detection and automatic address recognition • Development Tools - Nuvoton Nu-Link with KEILTM and IAR development environment. - Nuvoton Nu-Link In-Circuit-Programmer. - Nuvoton In-System-Programming (ISP). • 96-bit Unique ID (UID) • 128-bit Unique Customer ID (UCID)

MG51FC9AE Nuvoton Microcontroller NuMicro® MG51FC9AE is embedded with based on 1T 8051-based CMOS microcontroller, It supports 16/24 MHz core speed and features up to 32K bytes flash, 0 bytes SRAM, and 1 Kbyte of auxiliary RAM (XRAM), 4 Kbytes of Flash loader memory (LDROM), 2.4V to 5.5V operating voltage, and -40°C to105°C operating temperature. MG51 series is equipped with rich features 4 sets of 16-bit Timers, 8 channels of 500k SPS 12-bit ADC, 6 channels of PWM, 2 sets of UARTs, 1 set of SPI, 1 set of I2C MG51 series is suitable for high-reliability industrial and consumer applications. package is available in TSSOP20. Target Application: Home appliances LED lighting controls Motor controls Industrial automation Features: • Operating Characteristics - Operating Voltage: 2.4 V to 5.5 V - Operating Speed: Up to 24 MHz - Operating Temperature: -40°C to +105°C • Core - 1T 8051-based CMOS microcontroller running up to 24 MHz - Instruction set fully compatible with MCS-51 - 4-priority-level interrupts capability • Memory - 32 Kbytes Flash - Configurable 4 Kbytes of LDROM, which provides flexibility to user developed Boot Code. - 0 Bytes SRAM - 256 Bytes on-chip RAM. - Flash Memory accumulated with pages of 128 Bytes each. - Built-in In-Application-Programmable (IAP). • Clocks - 16 MHz high-speed internal oscillator with selectable 24 MHz core speed, trimmed to ±1% when VDD 3.3V, ±3% in all condition - 10 kHz low-speed internal oscillator. calibrating to ±10% precision • Timers - Four 16-bit timers - Six channels of pulse width modulator (PWM) output, with Fault Brake function - One dedicated Self Wake-up Timer (WKT) for self-timed wake-up for low-power modes - One programmable Watchdog Timer (WDT) clocked by dedicated 10 kHz internal source • Power Management - Two low power modes: Idle and Power-down mode - Power-down current: 8 μA • Analog - One 12-bit, 500 k SPS SAR ADC (8 channels input) • Communication Interface - One SPI port with master and slave modes, up to 12 Mbps when system clock running at 24 MHz - One I²C bus with master and slave modes, up to 400 kbps data rate - Two full-duplex UART ports with frame error detection and automatic address recognition • Development Tools - Nuvoton Nu-Link with KEILTM and IAR development environment. - Nuvoton Nu-Link In-Circuit-Programmer. - Nuvoton In-System-Programming (ISP). • 96-bit Unique ID (UID) • 128-bit Unique Customer ID (UCID)

MG51FB9AE Nuvoton Microcontroller NuMicro® MG51FB9AE is embedded with based on 1T 8051-based CMOS microcontroller, It supports 16/24 MHz core speed and features up to 16K bytes flash, 0 bytes SRAM, and 1 Kbyte of auxiliary RAM (XRAM), 4 Kbytes of Flash loader memory (LDROM), 2.4V to 5.5V operating voltage, and -40°C to105°C operating temperature. MG51 series is equipped with rich features 4 sets of 16-bit Timers, 8 channels of 500k SPS 12-bit ADC, 6 channels of PWM, 2 sets of UARTs, 1 set of SPI, 1 set of I²C MG51 series is suitable for high-reliability industrial and consumer applications. package is available in TSSOP20. Target Application: Home appliances LED lighting controls Motor controls Industrial automation Features: • Operating Characteristics - Operating Voltage: 2.4 V to 5.5 V - Operating Speed: Up to 24 MHz - Operating Temperature: -40°C to +105°C • Core - 1T 8051-based CMOS microcontroller running up to 24 MHz - Instruction set fully compatible with MCS-51 - 4-priority-level interrupts capability • Memory - 16 Kbytes Flash - Configurable 4 Kbytes of LDROM, which provides flexibility to user developed Boot Code. - 0 Bytes SRAM - 256 Bytes on-chip RAM. - Flash Memory accumulated with pages of 128 Bytes each. - Built-in In-Application-Programmable (IAP). • Clocks - 16 MHz high-speed internal oscillator with selectable 24 MHz core speed, trimmed to ±1% when VDD 3.3V, ±3% in all condition - 10 kHz low-speed internal oscillator. calibrating to ±10% precision • Timers - Four 16-bit timers - Six channels of pulse width modulator (PWM) output, with Fault Brake function - One dedicated Self Wake-up Timer (WKT) for self-timed wake-up for low-power modes - One programmable Watchdog Timer (WDT) clocked by dedicated 10 kHz internal source • Power Management - Two low power modes: Idle and Power-down mode - Power-down current: 8 μA • Analog - One 12-bit, 500 k SPS SAR ADC (8 channels input) • Communication Interface - One SPI port with master and slave modes, up to 12 Mbps when system clock running at 24 MHz - One I²C bus with master and slave modes, up to 400 kbps data rate - Two full-duplex UART ports with frame error detection and automatic address recognition • Development Tools - Nuvoton Nu-Link with KEILTM and IAR development environment. - Nuvoton Nu-Link In-Circuit-Programmer. - Nuvoton In-System-Programming (ISP). • 96-bit Unique ID (UID) • 128-bit Unique Customer ID (UCID)

N76S003AT20 Nuvoton Microcontroller N76S003AT20 is an embedded Flash type 1T 8051-based microcontroller, offers 18 KB Flash ROM, configurable Data Flash and 1 KB SRAM. It supports wide operating voltage of 2.4V to 5.5V , temperature range of - 40 ℃ to 105 ℃ , and high noise immunity of 7 kV ESD and 4 kV EFT. N76S003AT20 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I²C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2 % deviation 16 MHz Internal RC oscillator, and a high resolution 12-bit 8 channel ADC. N76S003AT20 supports small form factor packages TSSOP20 (4mm x 6.5mm) to make designing easily. Target Application: Access Control System, Thermostat, Bluetooth Speaker, Electric Meter, Data Collector, Battery charger, Beauty Equipment, Small Home Appliance, etc. Key Features: • Core - 1T 8051 processor - Max frequency up to 16 MHz - Wide operating voltage: 2.4V to 5.5V - Temperature range: - 40 ℃ to 105 ℃ • Memory - 18 KB of Flash memory - 1 KB of SRAM - Supports configurable Data Flash - Supports program update by: ISP (In-System Programming) ICP (In-Circuit Programming) IAP (In-Application Programming) • PWM - Up to 6-ch PWM - Programmable dead-zone generator • ADC - 12-bit 8-ch ADC - Runs up to 500 kSPS • Connectivity - Two UARTs up to 115200 bps - One SPI up to 8 MHz - One I²C up to 400 kHz • Clock Control - 2 % deviation 16 MHz Internal RC oscillator - 10 kHz Internal RC oscillator • Package - TSSOP20

N76S003AQ20 Nuvoton Microcontroller N76S003AQ20 is an embedded Flash type 1T 8051-based microcontroller, offers 18 KB Flash ROM, configurable Data Flash and 1 KB SRAM. It supports wide operating voltage of 2.4V to 5.5V , temperature range of - 40 ℃ to 105 ℃ , and high noise immunity of 7 kV ESD and 4 kV EFT. N76S003AQ20 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UART s, SPI, I²C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2 % deviation 16 MHz Internal RC oscillator, and a high resolution 12-bit 8 channel ADC. N76S003AQ20 supports small form factor packages QFN20 (3 mm x 3 mm) to make designing easily. Target Application: Access Control System, Thermostat, Bluetooth Speaker, Electric Meter, Data Collector, Battery charger, Beauty Equipment, Small Home Appliance, etc. Key Features: • Core - 1T 8051 processor - Max frequency up to 16 MHz - Wide operating voltage: 2.4V to 5.5V - Temperature range: - 40 ℃ to 105 ℃ • Memory - 18 KB of Flash memory - 1 KB of SRAM - Supports configurable Data Flash - Supports program update by: ISP (In-System Programming) ICP (In-Circuit Programming) IAP (In-Application Programming) • PWM - Up to 6-ch PWM - Programmable dead-zone generator • ADC - 12-bit 8-ch ADC - Runs up to 500 kSPS • Connectivity - Two UARTs up to 115200 bps - One SPI up to 8 MHz - One I²C up to 400 kHz • Clock Control - 2 % deviation 16 MHz Internal RC oscillator - 10 kHz Internal RC oscillator • Package - QFN20

W79E2051Akg Nuvoton Microchip Microcontroller

N79E352RADG Nuvoton Microcontroller IC 8-Bit 24MHz 8KB IC